xray T2009

atuya lawa n luxury bna r/c model xray T2009 ah.... bri nda tahan ati kn mbli......sabar.....hehehehe smpi hajat jua tu nanti........ hehehehe..... kn mngumpul usin ku dlu e kn mbli xray T2009..... nanti th ku mpost detail2nya...

1/10 R/C Car Tamiya TA05-IFS Series

Length: 442mm

(Image shows assembled and painted model kit)

Sleek GT300 Class Racing Machine

Team Nova entered their EBBRO 350R GT300 class race car, piloted by the duo of Tetsuya Tanaka and Shinsuke Yamazaki, for the 2007 Super GT season. Based on the Vemac 350R produced by R&D Sports, the car is equipped with a mid-mounted 3900cc V8 engine delivering over 400hp. With its wide and low silhouette, one may be led to believe that this car is an exotic Group C prototype racer rather than a GT300 machine. Tamiya now brings you the EBBRO 350R as an assembly kit R/C model, complete with accurately reproduced polycarbonate body shell and separately-molded rear wing.

Inboard Front Suspension 　

The EBBRO's chassis features belt-driven 4WD for high-performance racing, but the most innovative feature of its new TA05-IFS chassis is the inboard front suspension setup with horizontally-mounted dampers. Of course, both the front and rear reversible suspensions can be adjusted according to driver preferences, and coupled with the well-balanced chassis layout, one-piece motor mount, and ball differentials, this machine is hard to beat.

Inboard Front Suspension features a push rod/rocker arm setup with horizontally-mounted dampers.

Front suspension is also equipped with reversible suspension arm and glass-fiber reinforced lightweight hub carrier for extra durability.

Rear damper stays are designed specifically for use with the reversible suspension setup, providing smooth and stable performance.

Specifications:　

●Length: 442mm

• Width: 192mm
• Height: 112mm

●Wheelbase: 257mm

●Tread: 167mm

●Motor: Type RS540

●Drivetrain: Transverse motor with extra-long 2-belt 4WD

●Differential Gear: Front/Rear Ball Differentials

●Steering Tie-rod: 3-piece

●Suspension: Front/Rear Double Wishbone

●Dampers: Front/Rear Mini CVA Oil Dampers

●Gear Ratio: 7.159 :1

●Tire Width/Diameter: 24mm/64mm (same for front & rear)

●Speed controller: ESC

Separately Required Items:　

●R/C Unit: Expec GT-I or 2-channel R/C system

●Battery: Tamiya 7.2V Racing Pack or equivalent

●Alkaline Batteries for Transmitter

Price: BDN$298.00

1/10 R/C ELECTRIC POWERED 4WD TOURING CAR (Kyosho TF-5 Series)

Reap the advantages of aerodynamic body and shaft-driven 4WD in this Readyset.Trusted NOVAK one-piece motor control amp and receiver unit makes high-performance driving even easier.

The world-class 1/10 EP touring car racing performance of the TF-5 is now packaged in a Readyset for a user-friendly shaft-driven machine to suit beginners through to expert racers. Add the stunning aerodynamics of the body printed with vivid color scheme and this machine is on the road fast. Setting adjustment points are available on many parts for fine tuning optimal performance. Now everyone can experience EP touring car racing at its thrilling best!

Shaft-driven 4WD chassis is equipped with ball differentials on front and rear to realize driver-friendly high-speed performance to suit drivers of various levels.

Loaded with renowned NOVAK one-piece motor control amp and receiver unit. Suitable to 19-turn motors. Reverse function can also be deactivated.

Oil shocks with dial adjustment of chassis height for precision settings. Aluminum parts are anodized in red for stunning performance and style.

Readyset packaged around the TF-5:

• Vivid color scheme stencil printed onto a finished body.
  
• Sealed drive system ideal for parking lot racing performance.
  
• Drive system features full ball bearing specifications.
  
• Equipped with resin joint type universal swing shafts.
  
• Aluminum parts are anodized in red for spectacular color style.
  
• Composition of each part designed for impact resistance, ideal for a Readyset.
  
• Tires are pre-glued and motor control amp is also pre-set.
  
• Use optional motor and tire combinations to extract even more performance from the chassis.
  
• Compatible with TF-5 options and replacement parts and can be converted into different TF-5 versions.
  
• Loaded with user-friendly 20-turn G20 motor with built-in cooling fan. Provides constant high power over long run times.

Readyset Contents:

• 
  Fully-assembled chassis with R/C unit installed
  
• Perfex KT-3HS transmitter
  
• Hex wrench, cross wrench

Required for operation (Not included):

• 7.2V-2200mAh (minimum) Ni-Cd battery or Mi-MH battery for chassis
  
• Battery charger
  
• AA-size batteries X 8 for transmitter

Chassis Technical Data:

Length: 360mm
Width:（F）186mm/（R）185mm
Height: 115mm
Ground Clearance: 5mm
Wheelbase: 259mm
Tread (F/R): 162/161mm
Tire(F/R): Φ66×25mm
Gear Ratio: 4.7：1
Weight: Approximately 1,600g (with body)
Motor: 540-size 20-turn motor
Battery: 7.2V-2,200 - 3,900mAh battery (sold separately)

Price: BND$550.00

CYCLONE S DRIFT SPECIAL EDITION KIT

With many well-selected option parts for ultimate drift performance, the Cyclone S Drift Special Editions is released!

Coming with many well-selected option parts for ultimate drift performance, the new Cyclone S Drift Special Editions was made based on the Cyclone S Drift featuring excellent basic design and high-level drift performance. Enjoy the great performance and looks!

Parts included in the special edition

Aluminum parts:

- FRONT BULKHEAD SET (PURPLE)

- REAR BULKHEAD SET (PURPLE)

- MOTOR MOUNT (PURPLE)

- MIDDLE BLOCK R (PURPLE)

- SHOCK END BALL (PURPLE)

- HEATSINK MIDDLE CHASSIS (PURPLE)

Drift upgrade parts:

- PRO LINEAR SPRING 13x27mm(ORANGE 216g/mm)

- SOLID AXLE (61086)

- CENTER ONE-WAY（16T )

- UNIVERSAL DRIVE SHAFT SET (PURPLE)

- SPUR GEAR HUB (PURPLE)

- CENTER SHAFT（ONE-WAY)

- T-DRIFT TIRE 26mm

- WORK MEISTER S1 WHEEL 26mm CHROME (3mm OFFSET)

- WORK MEISTER S1 WHEEL 26mm CHROME (6mm OFFSET)

Others:

- WHEEL NUT M4 SERRATED (PURPLE)

SPECIFICATIONS:

SCALE RATIO: 1/10

LENGTH: 365mm

WIDTH: 190mm

WEIGHT: 1480g

WHEELBASE: 258mm

DRIVE SYSTEM: BELT DRIVE 4W

DTOE ANGLE: F: Changeable/ R: 3 degrees

DOWN STOP: Changeable

BUMP STEER: Changeable

SKID ANGLE: 0 degree

DRIVE RATIO: 2.4375

Price: BND$368.00

Hot Bodies digital high speed/torque servos

New from Hot Bodies:





Hot Bodies digital servos combine speed, reliability and toughness in one highly efficient unit!



We offer two dialled-in types of digital servos to make your choices easy. Both are very strong yet fast, but the #67991 DSJ-1SS is fastest with an amazing transit time of 0.06 seconds per centimeter of movement with a strength of 13kg per cm! The #67992 DSJ-2ST is nearly as fast at 0.09 seconds per centimeter, but has a whopping 16kg per cm of holding power! #67991 DSJ-1SS High Speed Digital Servo For Touring Car and 1/8th scale Buggies



Specification:



Speed: 0.06sec/cm
Torque: 13kg/cm
Weight: 67g
Steel/Aluminum Hybrid Gears
Sanwa/JR Type Servo Horns
Sanwa/JR Type Connector
Steel and Aluminum hybrid gear construction40.5 x 40 x 21mm
Servo lead wire: 20cm



#67992 DSJ-2ST High €Torque Digital Servo For Touring Car and 1/8th scale Buggies



Specification:

Speed: 0.09sec/cm
Torque: 16kg/cm
Weight: 67gSteel/Aluminum Hybrid Gears
Sanwa/JR Type Servo Horns
Sanwa/JR Type Connector Steel and Aluminum hybrid gear construction
40.5 x 40 x 21mm
Servo lead wire: 20cm

Venom 7.2 V 5000 mah NiMH Battery

Pushing the envelope of Sub C size battery technology, Venom™ is proud to provide the 7.2v 6-Cell 5000mah NiMH Battery Pack. The Venom 5000mah Battery Pack is built using the latest Quad Welding technology for superior strength and optimum power and comes pre-fitted with a standard Tamiya® type connector. The 5000mah Battery Pack delivers the PUNCH and RUN TIME for maximum performance demanded by R/C enthusiasts with a street price of around $99.99.

Specifications:

Battery Type: Nickel Metal Hydride (NiMH)

Length: 5.39" (137mm)

Height: 0.94" (24mm)

Width: 1.77" (45mm)

Weight: 14.4 oz (0.41kg)

Plug Type: Tamiya

Capacity: 5000mAh

Cell Configuration: 6-Cell

Voltage: 7.2V Amp
Rating: 5 amps

Venom Pro Charger with Power Supply

The Venom Pro Charger is designed to be a do-it-all workhorse and, as such, is capable of charging almost every type of battery. It supports Ni-Cd, NiMH, LiPo, Li-ON/Li-FE and lead acid batteries. I tested it by charging a range of batteries from 1/10-scale racing packs to 1/8-scale starter-box gel-cells.

The Venom Pro Charger is a very nice looking unit. Not only does the green aluminum look suit the charger well, the metal is very durable and will handle any bumps and drops that happen on or off the track. What is more important than the outer looks is how the interface handles while being used. One great feature is that the screen is backlit; this is very helpful in low light situations. Coupled with the back light are very easy to read menu settings, which are very clear to understand. There is nothing in the menus that may confuse the user. Anyone can pick up the charger and start using it, the Pro Charger is very user friendly. While the Venom is not the smallest charger in the world, it remains compact with an integrated fan to keep things cool.

Programming is a breeze, just hit the menu button to cycle through the battery types, set whether you would like the charger to charge, discharge, cycle, or one of my favorite features lipo storage mode. When using lipo storage, the charger will discharge (or charge) a battery up to 3.7 volts per cell. This is a perfect resting voltage for long term storage of your lipo packs. Another great feature is when you are balancing the lipo packs and using the included balancer, you can just hit the increase or decrease button and it will show the current voltage of every individual cell. A loud warning beep lets you know when charging is done.

The Venom Pro Charger includes an impressive supply of adapters for your batteries. You can hook up the charger to alligator clips, charge your receiver packs, and even charge your glow plug. Of course, you can charge batteries with the common Tamiya-type plug (a Traxxas plug and Deans plug are included as well). Having all these adapters in your toolbox comes in handy at the track or when out bashing.

I’ve rarely seen other chargers offer the ability to tweak and tune different profiles with your PC by using a USB adapter. This permits great customization, which will streamline use of the Pro Charger for different charging applications. The software is easy to use and the charger hooks up to a USB port on the computer. The software is included on a CD with the charger and is simple to install. It allows for an ever more user friendly programming interface. You can also save different profiles and quickly switch between every setting that can be programmed by loading a new profile. You also can record data such as voltage, current, capacity and temperature during the charging phase. It lays it out in graphical form for in depth information on your packs.

The Pro Charger includes a temperature probe, so in the event of a problem, the charger will react before severe damage occurs. While you should always monitor your battery packs while charging, having an extra safety net is always a plus. The charger also seems foolproof; if you set the wrong number of LiPo cells, for instance, the charger will not charge the packs.

I like the programmability and overall usefulness of the charger. I know that this charger can do it all. With all the various charging leads, USB tenability and features, the Venom Pro Charger is highly functional and convenient. It is great taking one charger to the track instead of multiple units. I also like that Venom offers a package that includes the power supply. Specs
> 1 to 6-cell LiPo, Li-ON/Li-FE
> 1 to 15 cells for NiCd and NiMH
> 0.1 to 5.0A charge rate
> Charging adapters included; Traxxas High Current Connector, Tamiya, Alligator Clip, Futaba, Deans, glow igniter and JST plug
> Temperature probe
> 10 charging profiles programmable with USB and included software
> Included LiPo balancer
> Available with and without power supply
> Street price: $110 w/o power supply, $140 with

Dynamite 4600 NiMh Packs

These new NiMh 6-cell flat packs offer the best in runtime at an affordable price. Packs are available with the standard "Tamiya style" plugs as well as the new Traxxas high-current plugs.

EnerG 4600mAh NiMH 6 Cell Flat w/ TRA

Part Number: DYN1870T

MSRP: $77.50

Available for*: $53.99

EnerG 4600mAh NiMh 6 Cell Flat

Part Number: DYN1870

MSRP: $75.00
Available for*: $49.99

Mysterious Drifter Club

being officialy organise by member of R/C Drifter........ bru jua dtubuhkn bru masih nie nyanta....